dmesg - AMD Ryzen 7 5800X3D 8-Core

Return To AMD Ryzen 7 5800X3D 8-Core System Information

Linux version 6.8.7-201.fsync.fc39.x86_64 (mockbuild@b62643b17a2f4ee699735d47ee9545e3) (gcc (GCC) 13.2.1 20240316 (Red Hat 13.2.1-7), GNU ld version 2.40-14.fc39) #1 SMP PREEMPT_DYNAMIC TKG Sun Apr 28 08:28:35 UTC 2024
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000bb31cfff] usable
BIOS-e820: [mem 0x00000000bb31d000-0x00000000bb69cfff] reserved
BIOS-e820: [mem 0x00000000bb69d000-0x00000000bb700fff] ACPI data
BIOS-e820: [mem 0x00000000bb701000-0x00000000bcdfffff] ACPI NVS
BIOS-e820: [mem 0x00000000bce00000-0x00000000bddfefff] reserved
BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083f37ffff] usable
BIOS-e820: [mem 0x000000083f380000-0x000000083fffffff] reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
e820: update [mem 0xb7fff018-0xb800e057] usable ==> usable
e820: update [mem 0xb7fff018-0xb800e057] usable ==> usable
e820: update [mem 0xb7fe0018-0xb7ffe257] usable ==> usable
e820: update [mem 0xb7fe0018-0xb7ffe257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d81fff] usable
reserve setup_data: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20e000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000b7fe0017] usable
reserve setup_data: [mem 0x00000000b7fe0018-0x00000000b7ffe257] usable
reserve setup_data: [mem 0x00000000b7ffe258-0x00000000b7fff017] usable
reserve setup_data: [mem 0x00000000b7fff018-0x00000000b800e057] usable
reserve setup_data: [mem 0x00000000b800e058-0x00000000bb31cfff] usable
reserve setup_data: [mem 0x00000000bb31d000-0x00000000bb69cfff] reserved
reserve setup_data: [mem 0x00000000bb69d000-0x00000000bb700fff] ACPI data
reserve setup_data: [mem 0x00000000bb701000-0x00000000bcdfffff] ACPI NVS
reserve setup_data: [mem 0x00000000bce00000-0x00000000bddfefff] reserved
reserve setup_data: [mem 0x00000000bddff000-0x00000000beffffff] usable
reserve setup_data: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
reserve setup_data: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000083f37ffff] usable
reserve setup_data: [mem 0x000000083f380000-0x000000083fffffff] reserved
efi: EFI v2.7 by American Megatrends
efi: ACPI=0xbcde9000 ACPI 2.0=0xbcde9014 SMBIOS=0xbdc03000 MEMATTR=0xb9922518 ESRT=0xba190e18 MOKvar=0xbdc30000 RNG=0xbb6c7018 
random: crng init done
efi: Remove mem293: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
e820: remove [mem 0xf0000000-0xf7ffffff] reserved
efi: Remove mem294: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
e820: remove [mem 0xfd200000-0xfd2fffff] reserved
efi: Remove mem295: MMIO range=[0xfd600000-0xfd7fffff] (2MB) from e820 map
e820: remove [mem 0xfd600000-0xfd7fffff] reserved
efi: Not removing mem296: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
efi: Remove mem297: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
e820: remove [mem 0xfeb80000-0xfec01fff] reserved
efi: Not removing mem298: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
efi: Not removing mem299: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
efi: Not removing mem300: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
efi: Not removing mem301: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
efi: Not removing mem302: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
efi: Not removing mem303: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
efi: Not removing mem304: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
efi: Remove mem305: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
e820: remove [mem 0xff000000-0xffffffff] reserved
secureboot: Secure boot disabled
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd. MS-7B85/B450 GAMING PRO CARBON AC (MS-7B85), BIOS 1.H1 05/15/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.207 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x83f380 max_arch_pfn = 0x400000000
total RAM covered: 3071M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 3  	lose cover RAM: 0G
MTRR map: 8 entries (4 fixed + 4 variable; max 21), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xbcbb0000-0xbcbbffff] usable ==> reserved
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
last_pfn = 0xbf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000ba190e18 to 0x00000000ba190e78.
e820: update [mem 0xba190000-0xba190fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0xb425b000-0xb77abfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BCDE9014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BCDE8728 0000C4 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: FACP 0x00000000BB6F2000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000BB6EB000 006DA1 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000BCDE3000 000040
ACPI: SSDT 0x00000000BB6F8000 008CE9 (v02 AMD    AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000BB6F4000 003B86 (v02 AMD    AMD AOD  00000001 INTL 20120913)
ACPI: SSDT 0x00000000BB6F3000 0000FC (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
ACPI: FIDT 0x00000000BB6EA000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000BB6E9000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000BB6E8000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: IVRS 0x00000000BB6E7000 0000D0 (v02 AMD    AmdTable 00000001 AMD  00000001)
ACPI: FPDT 0x00000000BB6E6000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: VFCT 0x00000000BB6DA000 00B084 (v01 ALASKA A M I    00000001 AMD  31504F47)
ACPI: BGRT 0x00000000BB6D9000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: PCCT 0x00000000BB6D8000 00006E (v02 AMD    AmdTable 00000001 AMD  00000001)
ACPI: SSDT 0x00000000BB6D3000 004043 (v02 AMD    AmdTable 00000001 AMD  00000001)
ACPI: CRAT 0x00000000BB6D2000 000F10 (v01 AMD    AmdTable 00000001 AMD  00000001)
ACPI: CDIT 0x00000000BB6D1000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
ACPI: SSDT 0x00000000BB6CD000 0037DC (v02 AMD    MYRTLE   00000001 INTL 20120913)
ACPI: SSDT 0x00000000BB6CC000 0000BF (v01 AMD    AmdTable 00001000 INTL 20120913)
ACPI: WSMT 0x00000000BB6CB000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: APIC 0x00000000BB6CA000 00015E (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000BB6C8000 0010AF (v02 AMD    MYRTLE   00000001 INTL 20120913)
ACPI: Reserving FACP table memory at [mem 0xbb6f2000-0xbb6f2113]
ACPI: Reserving DSDT table memory at [mem 0xbb6eb000-0xbb6f1da0]
ACPI: Reserving FACS table memory at [mem 0xbcde3000-0xbcde303f]
ACPI: Reserving SSDT table memory at [mem 0xbb6f8000-0xbb700ce8]
ACPI: Reserving SSDT table memory at [mem 0xbb6f4000-0xbb6f7b85]
ACPI: Reserving SSDT table memory at [mem 0xbb6f3000-0xbb6f30fb]
ACPI: Reserving FIDT table memory at [mem 0xbb6ea000-0xbb6ea09b]
ACPI: Reserving MCFG table memory at [mem 0xbb6e9000-0xbb6e903b]
ACPI: Reserving HPET table memory at [mem 0xbb6e8000-0xbb6e8037]
ACPI: Reserving IVRS table memory at [mem 0xbb6e7000-0xbb6e70cf]
ACPI: Reserving FPDT table memory at [mem 0xbb6e6000-0xbb6e6043]
ACPI: Reserving VFCT table memory at [mem 0xbb6da000-0xbb6e5083]
ACPI: Reserving BGRT table memory at [mem 0xbb6d9000-0xbb6d9037]
ACPI: Reserving PCCT table memory at [mem 0xbb6d8000-0xbb6d806d]
ACPI: Reserving SSDT table memory at [mem 0xbb6d3000-0xbb6d7042]
ACPI: Reserving CRAT table memory at [mem 0xbb6d2000-0xbb6d2f0f]
ACPI: Reserving CDIT table memory at [mem 0xbb6d1000-0xbb6d1028]
ACPI: Reserving SSDT table memory at [mem 0xbb6cd000-0xbb6d07db]
ACPI: Reserving SSDT table memory at [mem 0xbb6cc000-0xbb6cc0be]
ACPI: Reserving WSMT table memory at [mem 0xbb6cb000-0xbb6cb027]
ACPI: Reserving APIC table memory at [mem 0xbb6ca000-0xbb6ca15d]
ACPI: Reserving SSDT table memory at [mem 0xbb6c8000-0xbb6c90ae]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083f37ffff]
NODE_DATA(0) allocated [mem 0x83f355000-0x83f37ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000083f37ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009d81fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20e000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000bb31cfff]
  node   0: [mem 0x00000000bddff000-0x00000000beffffff]
  node   0: [mem 0x0000000100000000-0x000000083f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083f37ffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 638 pages in unavailable ranges
On node 0, zone DMA32: 14 pages in unavailable ranges
On node 0, zone DMA32: 32 pages in unavailable ranges
On node 0, zone DMA32: 10978 pages in unavailable ranges
On node 0, zone Normal: 4096 pages in unavailable ranges
On node 0, zone Normal: 3200 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xb8dbd000-0xb8e19fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xb7fe0000-0xb7fe0fff]
PM: hibernation: Registered nosave memory: [mem 0xb7ffe000-0xb7ffefff]
PM: hibernation: Registered nosave memory: [mem 0xb7fff000-0xb7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xb800e000-0xb800efff]
PM: hibernation: Registered nosave memory: [mem 0xb8dbd000-0xb8e19fff]
PM: hibernation: Registered nosave memory: [mem 0xba190000-0xba190fff]
PM: hibernation: Registered nosave memory: [mem 0xbb31d000-0xbb69cfff]
PM: hibernation: Registered nosave memory: [mem 0xbb69d000-0xbb700fff]
PM: hibernation: Registered nosave memory: [mem 0xbb701000-0xbcdfffff]
PM: hibernation: Registered nosave memory: [mem 0xbce00000-0xbddfefff]
PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[mem 0xc0000000-0xfe9fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Unknown kernel command line parameters "splash BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.8.7-201.fsync.fc39.x86_64", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 8238618
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 32.
Memory: 32644992K/33478212K available (22528K kernel code, 3285K rwdata, 14532K rodata, 4820K init, 4444K bss, 832960K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 52169 entries in 204 pages
ftrace: allocated 204 pages with 4 groups
BORE (Burst-Oriented Response Enhancer) CPU Scheduler modification 4.2.3 by Masahito Suzuki
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
ACPI: Core revision 20230628
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
APIC: Switched APIC routing to: physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x31031208de1, max_idle_ns: 440795247340 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.41 BogoMIPS (lpj=3400207)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See  for mitigation options.
Speculative Return Stack Overflow: Vulnerable: Safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 60K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,yama,bpf,landlock,apparmor,integrity
Yama: becoming mindful.
LSM support for eBPF active
landlock: Up and running.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 5800X3D 8-Core Processor (family: 0x19, model: 0x21, stepping: 0x2)
RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 400.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
Spectre V2 : Update user space SMT mitigation: STIBP always-on
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (108806.62 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xbb701000-0xbcdfffff] (24113152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 19:36:26, date: 2024-05-15
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1715801785.159:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
PCI: not using ECAM ([mem 0xf0000000-0xf7ffffff] not reserved)
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
PCI: ECAM [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfcffffff window]
pci_bus 0000:00: root bus resource [mem 0x840000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1483] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.3: PCI bridge to [bus 03-25]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfc500000-0xfc8fffff]
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.1: PCI bridge to [bus 26-28]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:00:03.1:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
pci 0000:00:07.1: PCI bridge to [bus 29]
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
pci 0000:00:08.1: PCI bridge to [bus 2a]
pci 0000:00:08.1:   bridge window [mem 0xfc900000-0xfcbfffff]
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
pci 0000:01:00.0: [1987:5016] type 00 class 0x010802 PCIe Endpoint
pci 0000:01:00.0: BAR 0 [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330 PCIe Legacy Endpoint
pci 0000:03:00.0: BAR 0 [mem 0xfc8a0000-0xfc8a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.3 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601 PCIe Legacy Endpoint
pci 0000:03:00.1: BAR 5 [mem 0xfc880000-0xfc89ffff]
pci 0000:03:00.1: ROM [mem 0xfc800000-0xfc87ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400 PCIe Switch Upstream Port
pci 0000:03:00.2: PCI bridge to [bus 20-25]
pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:03:00.2:   bridge window [mem 0xfc500000-0xfc7fffff]
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-25]
pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:00.0:   bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:20:00.0: PME# supported from D3hot D3cold
pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:20:01.0:   bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:20:01.0: PME# supported from D3hot D3cold
pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:20:04.0:   bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:20:04.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 20-25]
pci 0000:21:00.0: [8086:2526] type 00 class 0x028000 PCIe Endpoint
pci 0000:21:00.0: BAR 0 [mem 0xfc700000-0xfc703fff 64bit]
pci 0000:21:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [8086:1539] type 00 class 0x020000 PCIe Endpoint
pci 0000:22:00.0: BAR 0 [mem 0xfc600000-0xfc61ffff]
pci 0000:22:00.0: BAR 2 [io  0xf000-0xf01f]
pci 0000:22:00.0: BAR 3 [mem 0xfc620000-0xfc623fff]
pci 0000:22:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:25:00.0: [126f:2263] type 00 class 0x010802 PCIe Endpoint
pci 0000:25:00.0: BAR 0 [mem 0xfc500000-0xfc503fff 64bit]
pci 0000:25:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.3 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:26:00.0: [1002:1478] type 01 class 0x060400 PCIe Switch Upstream Port
pci 0000:26:00.0: BAR 0 [mem 0xfce00000-0xfce03fff]
pci 0000:26:00.0: PCI bridge to [bus 27-28]
pci 0000:26:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:26:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:26:00.0:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:00:03.1: PCI bridge to [bus 26-28]
pci 0000:27:00.0: [1002:1479] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0000:27:00.0: PCI bridge to [bus 28]
pci 0000:27:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:27:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:27:00.0:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:27:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:00.0: PCI bridge to [bus 27-28]
pci 0000:28:00.0: [1002:73a5] type 00 class 0x030000 PCIe Legacy Endpoint
pci 0000:28:00.0: BAR 0 [mem 0x7800000000-0x7bffffffff 64bit pref]
pci 0000:28:00.0: BAR 2 [mem 0x7c00000000-0x7c0fffffff 64bit pref]
pci 0000:28:00.0: BAR 4 [io  0xe000-0xe0ff]
pci 0000:28:00.0: BAR 5 [mem 0xfcc00000-0xfccfffff]
pci 0000:28:00.0: ROM [mem 0xfcd00000-0xfcd1ffff pref]
pci 0000:28:00.0: BAR 0: assigned to efifb
pci 0000:28:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:28:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:28:00.1: [1002:ab28] type 00 class 0x040300 PCIe Legacy Endpoint
pci 0000:28:00.1: BAR 0 [mem 0xfcd20000-0xfcd23fff]
pci 0000:28:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:27:00.0: PCI bridge to [bus 28]
pci 0000:29:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
pci 0000:00:07.1: PCI bridge to [bus 29]
pci 0000:2a:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
pci 0000:2a:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
pci 0000:2a:00.1: BAR 2 [mem 0xfca00000-0xfcafffff]
pci 0000:2a:00.1: BAR 5 [mem 0xfcb08000-0xfcb09fff]
pci 0000:2a:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
pci 0000:2a:00.3: BAR 0 [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:2a:00.4: [1022:1487] type 00 class 0x040300 PCIe Endpoint
pci 0000:2a:00.4: BAR 0 [mem 0xfcb00000-0xfcb07fff]
pci 0000:2a:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 2a]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xb7fe0018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7fff018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb8dbd000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba190000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb31d000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x83f380000-0x83fffffff]
pci 0000:28:00.0: vgaarb: setting as boot VGA device
pci 0000:28:00.0: vgaarb: bridge control possible
pci 0000:28:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
system 00:03: [io  0x0a00-0x0a0f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
pnp 00:04: [dma 0 disabled]
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x040b] has been reserved
system 00:05: [io  0x04d6] has been reserved
system 00:05: [io  0x0c00-0x0c01] has been reserved
system 00:05: [io  0x0c14] has been reserved
system 00:05: [io  0x0c50-0x0c51] has been reserved
system 00:05: [io  0x0c52] has been reserved
system 00:05: [io  0x0c6c] has been reserved
system 00:05: [io  0x0c6f] has been reserved
system 00:05: [io  0x0cd8-0x0cdf] has been reserved
system 00:05: [io  0x0800-0x089f] has been reserved
system 00:05: [io  0x0b00-0x0b0f] has been reserved
system 00:05: [io  0x0b20-0x0b3f] has been reserved
system 00:05: [io  0x0900-0x090f] has been reserved
system 00:05: [io  0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:00.0:   bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:20:01.0:   bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:20:04.0:   bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:03:00.2: PCI bridge to [bus 20-25]
pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:03:00.2:   bridge window [mem 0xfc500000-0xfc7fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-25]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfc500000-0xfc8fffff]
pci 0000:27:00.0: PCI bridge to [bus 28]
pci 0000:27:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:27:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:27:00.0:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:26:00.0: PCI bridge to [bus 27-28]
pci 0000:26:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:26:00.0:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:26:00.0:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 26-28]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcc00000-0xfcefffff]
pci 0000:00:03.1:   bridge window [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 29]
pci 0000:00:08.1: PCI bridge to [bus 2a]
pci 0000:00:08.1:   bridge window [mem 0xfc900000-0xfcbfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfcffffff window]
pci_bus 0000:00: resource 10 [mem 0x840000000-0x7fffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc8fffff]
pci_bus 0000:20: resource 0 [io  0xf000-0xffff]
pci_bus 0000:20: resource 1 [mem 0xfc500000-0xfc7fffff]
pci_bus 0000:21: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:22: resource 0 [io  0xf000-0xffff]
pci_bus 0000:22: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:25: resource 1 [mem 0xfc500000-0xfc5fffff]
pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
pci_bus 0000:26: resource 1 [mem 0xfcc00000-0xfcefffff]
pci_bus 0000:26: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci_bus 0000:27: resource 0 [io  0xe000-0xefff]
pci_bus 0000:27: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:27: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci_bus 0000:28: resource 0 [io  0xe000-0xefff]
pci_bus 0000:28: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:28: resource 2 [mem 0x7800000000-0x7c0fffffff 64bit pref]
pci_bus 0000:2a: resource 1 [mem 0xfc900000-0xfcbfffff]
pci 0000:28:00.1: D0 power state depends on 0000:28:00.0
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.3: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:05.0: Adding to iommu group 7
pci 0000:00:07.0: Adding to iommu group 8
pci 0000:00:07.1: Adding to iommu group 9
pci 0000:00:08.0: Adding to iommu group 10
pci 0000:00:08.1: Adding to iommu group 11
pci 0000:00:14.0: Adding to iommu group 12
pci 0000:00:14.3: Adding to iommu group 12
pci 0000:00:18.0: Adding to iommu group 13
pci 0000:00:18.1: Adding to iommu group 13
pci 0000:00:18.2: Adding to iommu group 13
pci 0000:00:18.3: Adding to iommu group 13
pci 0000:00:18.4: Adding to iommu group 13
pci 0000:00:18.5: Adding to iommu group 13
pci 0000:00:18.6: Adding to iommu group 13
pci 0000:00:18.7: Adding to iommu group 13
pci 0000:01:00.0: Adding to iommu group 14
pci 0000:03:00.0: Adding to iommu group 15
pci 0000:03:00.1: Adding to iommu group 15
pci 0000:03:00.2: Adding to iommu group 15
pci 0000:20:00.0: Adding to iommu group 15
pci 0000:20:01.0: Adding to iommu group 15
pci 0000:20:04.0: Adding to iommu group 15
pci 0000:21:00.0: Adding to iommu group 15
pci 0000:22:00.0: Adding to iommu group 15
pci 0000:25:00.0: Adding to iommu group 15
pci 0000:26:00.0: Adding to iommu group 16
pci 0000:27:00.0: Adding to iommu group 17
pci 0000:28:00.0: Adding to iommu group 18
pci 0000:28:00.1: Adding to iommu group 19
pci 0000:29:00.0: Adding to iommu group 20
pci 0000:2a:00.0: Adding to iommu group 21
pci 0000:2a:00.1: Adding to iommu group 22
pci 0000:2a:00.3: Adding to iommu group 23
pci 0000:2a:00.4: Adding to iommu group 24
AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b025b000-0x00000000b425b000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
amd_uncore: 4 amd_df counters detected
amd_uncore: 6 amd_l3 counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: automatically using best checksumming function   avx       
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 54596K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.1: PME: Signaling with IRQ 27
pcieport 0000:00:01.1: AER: enabled with IRQ 27
pcieport 0000:00:01.3: PME: Signaling with IRQ 28
pcieport 0000:00:01.3: AER: enabled with IRQ 28
pcieport 0000:00:03.1: PME: Signaling with IRQ 29
pcieport 0000:00:03.1: AER: enabled with IRQ 29
pcieport 0000:00:07.1: PME: Signaling with IRQ 31
pcieport 0000:00:07.1: AER: enabled with IRQ 31
pcieport 0000:00:08.1: PME: Signaling with IRQ 32
pcieport 0000:00:08.1: AER: enabled with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Estimated ratio of average max frequency by base frequency (times 1024): 1197
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C004: Found 2 idle states
ACPI: \_PR_.C006: Found 2 idle states
ACPI: \_PR_.C008: Found 2 idle states
ACPI: \_PR_.C00A: Found 2 idle states
ACPI: \_PR_.C00C: Found 2 idle states
ACPI: \_PR_.C00E: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
ACPI: \_PR_.C005: Found 2 idle states
ACPI: \_PR_.C007: Found 2 idle states
ACPI: \_PR_.C009: Found 2 idle states
ACPI: \_PR_.C00B: Found 2 idle states
ACPI: \_PR_.C00D: Found 2 idle states
ACPI: \_PR_.C00F: Found 2 idle states
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880100 irq 40 lpm-pol 0
ata2: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880180 irq 40 lpm-pol 0
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880300 irq 40 lpm-pol 0
ata6: SATA max UDMA/133 abar m131072@0xfc880000 port 0xfc880380 irq 40 lpm-pol 0
ata7: DUMMY
ata8: DUMMY
ACPI: bus type drm_connector registered
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.8.7-201.fsync.fc39.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.8.7-201.fsync.fc39.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:2a:00.3: xHCI Host Controller
xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:2a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:2a:00.3: xHCI Host Controller
xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:2a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.8.7-201.fsync.fc39.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:2a:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.8.7-201.fsync.fc39.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:2a:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2024-05-15T19:36:26 UTC (1715801786)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
amd_pstate: driver load is disabled, boot with specific mode to enable this
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
fbcon: Deferring console take-over
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
microcode: Current revision: 0x0a20120a
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (655296957, 317244690)->(991231611, -18689964)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 8fdff0b6bf7ab5aa8cc2c03557217bd64b7e20e0'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha256 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
blacklist: Duplicate blacklisted hash bin:47ff1b63b140b6fc04ed79131331e651da5b2e2f170f5daef4153dc2fbc532b1
blacklist: Duplicate blacklisted hash bin:5391c3a2fb112102a6aa1edc25ae77e19f5d6f09cd09eeb2509922bfcd5992ea
blacklist: Duplicate blacklisted hash bin:80b4d96931bf0d02fd91a61e19d14f1da452e66db2408ca8604d411f92659f0a
blacklist: Duplicate blacklisted hash bin:992d359aa7a5f789d268b94c11b9485a6b1ce64362b0edb4441ccc187c39647b
blacklist: Duplicate blacklisted hash bin:c452ab846073df5ace25cca64d6b7a09d906308a1a65eb5240e3c4ebcaa9cc0c
blacklist: Duplicate blacklisted hash bin:e051b788ecbaeda53046c70e6af6058f95222c046157b8c4c1b9c2cfc65f46e5
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 8fdff0b6bf7ab5aa8cc2c03557217bd64b7e20e0'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux (disabled)
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
PM:   Magic number: 8:717:647
scsi_host host1: hash matches
scsi host1: hash matches
acpi LNXCPU:00: hash matches
RAS: Correctable Errors collector initialized.
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 1-2: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=2516, idProduct=007f, bcdDevice= 7.20
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 3-1: Product: Gaming MECH KB
usb 3-1: Manufacturer: Cooler Master Technology Inc.
input: Cooler Master Technology Inc. Gaming MECH KB as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-1/3-1:1.0/0003:2516:007F.0001/input/input2
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
hid-generic 0003:2516:007F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cooler Master Technology Inc. Gaming MECH KB] on usb-0000:2a:00.3-1/input0
hid-generic 0003:2516:007F.0002: hiddev96,hidraw1: USB HID v1.11 Device [Cooler Master Technology Inc. Gaming MECH KB] on usb-0000:2a:00.3-1/input1
input: Cooler Master Technology Inc. Gaming MECH KB System Control as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-1/3-1:1.2/0003:2516:007F.0003/input/input3
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
input: Cooler Master Technology Inc. Gaming MECH KB Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-1/3-1:1.2/0003:2516:007F.0003/input/input4
input: Cooler Master Technology Inc. Gaming MECH KB Mouse as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-1/3-1:1.2/0003:2516:007F.0003/input/input5
input: Cooler Master Technology Inc. Gaming MECH KB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-1/3-1:1.2/0003:2516:007F.0003/input/input6
hid-generic 0003:2516:007F.0003: input,hidraw2: USB HID v1.11 Mouse [Cooler Master Technology Inc. Gaming MECH KB] on usb-0000:2a:00.3-1/input2
usb 1-2: New USB device found, idVendor=1038, idProduct=12ad, bcdDevice= 1.19
usb 1-2: New USB device strings: Mfr=4, Product=5, SerialNumber=0
usb 1-2: Product: SteelSeries Arctis 7
usb 1-2: Manufacturer: SteelSeries 
input: SteelSeries  SteelSeries Arctis 7 Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2:1.5/0003:1038:12AD.0004/input/input7
usb 3-2: new full-speed USB device number 3 using xhci_hcd
input: SteelSeries  SteelSeries Arctis 7 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-2/1-2:1.5/0003:1038:12AD.0004/input/input9
hid-generic 0003:1038:12AD.0004: input,hiddev97,hidraw3: USB HID v1.11 Device [SteelSeries  SteelSeries Arctis 7] on usb-0000:03:00.0-2/input5
tsc: Refined TSC clocksource calibration: 3399.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024bd20a6, max_idle_ns: 440795346804 ns
clocksource: Switched to clocksource tsc
usb 3-2: New USB device found, idVendor=046d, idProduct=c07e, bcdDevice=90.03
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Gaming Mouse G402
usb 3-2: Manufacturer: Logitech
usb 3-2: SerialNumber: 6D73568C5554
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-2/3-2:1.0/0003:046D:C07E.0005/input/input10
hid-generic 0003:046D:C07E.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:2a:00.3-2/input0
input: Logitech Gaming Mouse G402 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-2/3-2:1.1/0003:046D:C07E.0006/input/input11
usb 1-8: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:046D:C07E.0006: input,hiddev98,hidraw5: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:2a:00.3-2/input1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-9: Samsung SSD 850 EVO mSATA 250GB, EMT41B6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
sd 1:0:0:0: Attached scsi generic sg1 type 0
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 3-3: new full-speed USB device number 4 using xhci_hcd
usb 3-3: New USB device found, idVendor=1462, idProduct=7b85, bcdDevice= 0.01
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: PRO CARBON 12
usb 3-3: Manufacturer: MSI
usb 3-3: SerialNumber: A02018061512
input: MSI PRO CARBON 12 as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/usb3/3-3/3-3:1.0/0003:1462:7B85.0007/input/input14
hid-generic 0003:1462:7B85.0007: input,hiddev99,hidraw6: USB HID v1.10 Device [MSI PRO CARBON 12] on usb-0000:2a:00.3-3/input0
ata5: SATA link down (SStatus 0 SControl 330)
usb 1-8: New USB device found, idVendor=045e, idProduct=02d1, bcdDevice= 2.03
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: Controller
usb 1-8: Manufacturer: Microsoft
usb 1-8: SerialNumber: 7EED89A8F4CA
usb 3-4: new full-speed USB device number 5 using xhci_hcd
usb 1-9: new full-speed USB device number 4 using xhci_hcd
usb 3-4: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata6: SATA link down (SStatus 0 SControl 330)
clk: Disabling unused clocks
Freeing unused decrypted memory: 2028K
Freeing unused kernel image (initmem) memory: 4820K
Write protecting the kernel read-only data: 38912k
Freeing unused kernel image (rodata/data gap) memory: 1852K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(hd1,gpt2)/vmlinuz-6.8.7-201.fsync.fc39.x86_64
systemd[1]: systemd 254.10-1.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
fbcon: Taking over console
systemd[1]: Hostname set to .
Console: switching to colour frame buffer device 128x48
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd-journald[367]: Collecting audit messages is disabled.
systemd[1]: Finished systemd-sysusers.service - Create System Users.
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
i2c_dev: i2c /dev entries driver
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
systemd[1]: Reached target local-fs.target - Local File Systems.
fuse: init (API version 7.39)
mc: Linux media interface: v0.10
systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
videodev: Linux video capture interface: v2.00
v4l2loopback: loading out-of-tree module taints kernel.
v4l2loopback: module verification failed: signature and/or required key missing - tainting kernel
v4l2loopback: unknown parameter 'Loopback'' ignored
v4l2loopback driver version 0.13.1 loaded
systemd[1]: Starting dracut-cmdline-ask.service - dracut ask for additional cmdline parameters...
systemd[1]: Started systemd-journald.service - Journal Service.
dca service started, version 1.12.1
ccp 0000:2a:00.1: enabling device (0000 -> 0002)
ccp 0000:2a:00.1: ccp: unable to access the device: you might be running a broken BIOS.
ccp 0000:2a:00.1: psp enabled
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:22:00.0: enabling device (0000 -> 0002)
nvme nvme0: pci function 0000:01:00.0
nvme nvme1: pci function 0000:25:00.0
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme0: Ignoring bogus Namespace Identifiers
 nvme0n1: p1 p2
nvme nvme1: allocated 64 MiB host memory buffer.
pps pps0: new PPS source ptp0
igb 0000:22:00.0: added PHC on eth0
igb 0000:22:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:22:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:d8:61:15:fc:a0
igb 0000:22:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:22:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
nvme nvme1: 15/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
 nvme1n1: p1 p2 p3 p4 p5
igb 0000:22:00.0 enp34s0: renamed from eth0
BTRFS: device fsid 21ec2af9-7f8e-407c-84fc-f6ac5a890cac devid 1 transid 1816 /dev/sdb3 scanned by mount (617)
BTRFS info (device sdb3): first mount of filesystem 21ec2af9-7f8e-407c-84fc-f6ac5a890cac
BTRFS info (device sdb3): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device sdb3): using free-space-tree
usb 1-9: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 1.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-9: Product: Ellipse PRO
usb 1-9: Manufacturer: EATON
usb 1-9: SerialNumber: G363N15073
[drm] amdgpu kernel modesetting enabled.
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:28:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (SIENNA_CICHLID 0x1002:0x73A5 0x1EAE:0x6950 0xC0).
[drm] register mmio base: 0xFCC00000
[drm] register mmio size: 1048576
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
[drm] add ip block number 9 
amdgpu 0000:28:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-69KB6SHF1-D01
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(1) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] VCN(1) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
Console: switching to colour dummy device 80x25
amdgpu 0000:28:00.0: vgaarb: deactivate vga console
amdgpu 0000:28:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
amdgpu 0000:28:00.0: amdgpu: MEM ECC is not presented.
amdgpu 0000:28:00.0: amdgpu: SRAM ECC is not presented.
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:28:00.0: amdgpu: VRAM: 16368M 0x0000008000000000 - 0x00000083FEFFFFFF (16368M used)
amdgpu 0000:28:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=16368M, BAR=16384M
[drm] RAM width 256bits GDDR6
[drm] amdgpu: 16368M of VRAM memory ready
[drm] amdgpu: 16004M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
hid-generic 0003:0463:FFFF.0008: hiddev100,hidraw7: USB HID v1.10 Device [EATON Ellipse PRO] on usb-0000:03:00.0-9/input0
amdgpu 0000:28:00.0: amdgpu: STB initialized to 2048 entries
[drm] Loading DMUB firmware via PSP: version=0x02020020
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.30 DEC: 3 VEP: 0 Revision: 4
amdgpu 0000:28:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0x83fd000000 for PSP TMR
amdgpu 0000:28:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:28:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5900 (58.89.0)
amdgpu 0000:28:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:28:00.0: amdgpu: use vbios provided pptable
amdgpu 0000:28:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core v3.2.266 initialized on DCN 3.0
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x02020020
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
amdgpu: HMM registered 16368MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x73a5:0x1002]
kfd kfd: amdgpu: added device 1002:73a5
amdgpu 0000:28:00.0: amdgpu: SE 4, SH per SE 2, CU per SH 10, active_cu_number 80
amdgpu 0000:28:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring sdma2 uses VM inv eng 14 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring sdma3 uses VM inv eng 15 on hub 0
amdgpu 0000:28:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring vcn_dec_1 uses VM inv eng 5 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 6 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring vcn_enc_1.1 uses VM inv eng 7 on hub 8
amdgpu 0000:28:00.0: amdgpu: ring jpeg_dec uses VM inv eng 8 on hub 8
amdgpu 0000:28:00.0: amdgpu: Using BACO for runtime pm
[drm] Initialized amdgpu 3.57.0 20150101 for 0000:28:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
[drm] DSC precompute is not needed.
Console: switching to colour frame buffer device 430x90
amdgpu 0000:28:00.0: [drm] fb0: amdgpudrmfb frame buffer device
systemd-journald[367]: Received SIGTERM from PID 1 (systemd).
systemd[1]: systemd 254.10-1.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
systemd-sysv-generator[718]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
systemd-sysv-generator[718]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
zram: Added device: zram0
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped initrd-switch-root.service - Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice system-akmods\x2dkeygen.slice - Slice /system/akmods-keygen.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Expecting device dev-zram0.device - /dev/zram0...
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: Starting apparmor.service - Load AppArmor profiles...
systemd[1]: iscsi-starter.service was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/var/lib/iscsi/nodes).
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped systemd-fsck-root.service - File System Check on Root Device.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
loop: module loaded
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line.
systemd-journald[746]: Collecting audit messages is enabled.
BTRFS info (device sdb3: state M): use zstd compression, level 1
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
audit: type=1130 audit(1715801794.642:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: iscsi-onboot.service - Special handling of early boot iSCSI sessions was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/class/iscsi_session).
systemd[1]: ostree-remount.service - OSTree Remount OS/ Bind Mounts was skipped because of an unmet condition check (ConditionKernelCommandLine=ostree).
systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
systemd[1]: Started systemd-journald.service - Journal Service.
audit: type=1130 audit(1715801794.649:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1400 audit(1715801794.661:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=766 comm="apparmor_parser"
audit: type=1300 audit(1715801794.661:4): arch=c000003e syscall=1 success=yes exit=19537 a0=5 a1=55bc09530640 a2=4c51 a3=0 items=0 ppid=748 pid=766 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj=unconfined key=(null)
audit: type=1327 audit(1715801794.661:4): proctitle=2F7362696E2F61707061726D6F725F706172736572002D2D7265706C616365002D2D002F6574632F61707061726D6F722E64
audit: type=1400 audit(1715801794.662:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=772 comm="apparmor_parser"
audit: type=1300 audit(1715801794.662:5): arch=c000003e syscall=1 success=yes exit=20137 a0=5 a1=55bc09522690 a2=4ea9 a3=0 items=0 ppid=748 pid=772 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj=unconfined key=(null)
audit: type=1327 audit(1715801794.662:5): proctitle=2F7362696E2F61707061726D6F725F706172736572002D2D7265706C616365002D2D002F6574632F61707061726D6F722E64
audit: type=1400 audit(1715801794.667:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=755 comm="apparmor_parser"
audit: type=1300 audit(1715801794.667:6): arch=c000003e syscall=1 success=yes exit=32585 a0=5 a1=55bc0957e4c0 a2=7f49 a3=0 items=0 ppid=748 pid=755 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/usr/sbin/apparmor_parser" subj=unconfined key=(null)
systemd-journald[746]: Received client request to flush runtime journal.
systemd-journald[746]: /var/log/journal/06639412b7c84c478684847cf7eb5021/system.journal: Journal file uses a different sequence number ID, rotating.
systemd-journald[746]: Rotating system journal.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
usbcore: registered new interface driver xone-dongle
zram0: detected capacity change from 0 to 16777216
Adding 8388604k swap on /dev/zram0.  Priority:100 extents:1 across:8388604k SSDsc
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
usb 1-8: reset full-speed USB device number 3 using xhci_hcd
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input15
Intel(R) Wireless WiFi driver for Linux
Adding 36055340k swap on /dev/sdb4.  Priority:-2 extents:1 across:36055340k SS
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
iwlwifi 0000:21:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:21:00.0: Detected crf-id 0x2816, cnv-id 0x1000200 wfpm id 0x80000000
iwlwifi 0000:21:00.0: PCI dev 2526/0014, rev=0x321, rfid=0x105110
iwlwifi 0000:21:00.0: WRT: Overriding region id 0
iwlwifi 0000:21:00.0: WRT: Overriding region id 1
iwlwifi 0000:21:00.0: WRT: Overriding region id 2
iwlwifi 0000:21:00.0: WRT: Overriding region id 3
iwlwifi 0000:21:00.0: WRT: Overriding region id 4
iwlwifi 0000:21:00.0: WRT: Overriding region id 6
iwlwifi 0000:21:00.0: WRT: Overriding region id 8
iwlwifi 0000:21:00.0: WRT: Overriding region id 9
iwlwifi 0000:21:00.0: WRT: Overriding region id 10
iwlwifi 0000:21:00.0: WRT: Overriding region id 11
iwlwifi 0000:21:00.0: WRT: Overriding region id 15
iwlwifi 0000:21:00.0: WRT: Overriding region id 16
iwlwifi 0000:21:00.0: WRT: Overriding region id 18
iwlwifi 0000:21:00.0: WRT: Overriding region id 19
iwlwifi 0000:21:00.0: WRT: Overriding region id 20
iwlwifi 0000:21:00.0: WRT: Overriding region id 21
iwlwifi 0000:21:00.0: WRT: Overriding region id 28
iwlwifi 0000:21:00.0: loaded firmware version 46.7e3e4b69.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:28:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:28:00.1: Force to non-snoop mode
snd_hda_intel 0000:2a:00.4: enabling device (0000 -> 0002)
EXT4-fs (sdb2): mounted filesystem 50d59143-d071-4143-993d-9f03ad284387 r/w with ordered data mode. Quota mode: none.
snd_hda_intel 0000:28:00.1: bound 0000:28:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input19
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input20
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card1/input21
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0:    inputs:
snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: LBR virtualization supported
MCE: In-kernel MCE decoding enabled.
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input22
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input23
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input24
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input25
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input26
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input27
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2a:00.4/sound/card2/input28
iwlwifi 0000:21:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x321
thermal thermal_zone0: failed to read out thermal zone (-61)
usbcore: registered new interface driver xone-wired
loaded hid-xpadneo v0.9.6
iwlwifi 0000:21:00.0: base HW address: 18:1d:ea:86:e5:bb, OTP minor version: 0x4
usbcore: registered new interface driver btusb
Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
Bluetooth: hci0: Boot Address: 0x40800
Bluetooth: hci0: Firmware Version: 155-35.23
Bluetooth: hci0: Firmware already loaded
Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:21:00.0 wlo1: renamed from wlan0
usbcore: registered new interface driver snd-usb-audio
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_QIPCRTR protocol family
input: Microsoft Xbox Controller as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.0/gip0/gip0.0/input/input29
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
iwlwifi 0000:21:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)
igb 0000:22:00.0 enp34s0: igb: enp34s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
warning: `QSampleCache::L' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd-journald[746]: /var/log/journal/06639412b7c84c478684847cf7eb5021/user-1000.journal: Journal file uses a different sequence number ID, rotating.
systemd-sysv-generator[10578]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
systemd-sysv-generator[10578]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !

Return To AMD Ryzen 7 5800X3D 8-Core System Information